Specifications, Uses, SDS of Calcium Hydroxide Manufacturers

	King of Chemicals Manufacturers
Specifications, Properties, Uses, SDS of Hydrated Lime, Slaked Lime, Calcium Hydroxide USP BP Ph Eur IP Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 1305-62-0.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Hydrated Lime, Slaked Lime, Calcium Hydroxide for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

The Properties, Specifications, Monograph and Uses of Hydrated Lime, Slaked Lime, Calcium Hydroxide:

CAS Number1305-62-0, EINECS EC Number 215-137-3, HS Code: 28259040, Molecular Weight 74.1, Chemical Formula Ca(OH)2

Calcium hydroxide or Slaked lime is an inorganic compound with the chemical formula Ca(OH)2. It has many names including hydrated lime, caustic lime, builders' lime, slack lime, and pickling lime. Calcium hydroxide is used in many applications, including food preparation, where it has been identified as E number E526. Limewater is the common name for a saturated solution of calcium hydroxide. Calcium hydroxide is commonly used to prepare lime mortar. One significant use of calcium hydroxide is as a flocculant, in water and sewage treatment. Slaked lime is widely used in the food industry.

Specifications of Calcium Hydroxide USP Grade
Calcium Hydroxide; Lime
Ca(OH)2 -- 74.09 --- CAS 1305-62-0.

Calcium Hydroxide contains not less than 95.0 percent and not more than 100.5 percent of Ca(OH)2.

Identification:
A: When mixed with from three to four times its weight of water, it forms a smooth magma. The clear, supernatant from the magma is alkaline to litmus.
B: Mix 1 g with 20 mL of water, and add sufficient 6 N acetic acid to effect solution: the resulting solution responds to the tests for Calcium.
Limit of acid-insoluble substances: Dissolve 2.0 g in 30 mL of 4 N hydrochloric acid, and heat to boiling. Filter the mixture, wash the residue with hot water, and ignite: the weight of the residue does not exceed 10 mg (0.5%).
Carbonate: Mix 2 g with 50 mL of water: the addition of an excess of 3 N hydrochloric acid to the mixture does not cause more than a slight effervescence.
Heavy metals: Dissolve 2.0 g in 20 mL of 3 N hydrochloric acid, and evaporate on a steam bath to dryness. Dissolve the residue in 20 mL of water, and filter. Dilute the filtrate with water to 40 mL, and to 20 mL of the resulting solution add 1 mL of 0.1 N hydrochloric acid, then add water to make 25 mL: the limit is 20 6g per g.
Limit of magnesium and alkali salts: Dissolve 0.50 g in a mixture of 30 mL of water and 10 mL of 3 N hydrochloric acid, and proceed as directed in the test for Magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute.” The weight of the residue does not exceed 12 mg (4.8%).

CHARACTERS
Appearance: White or almost white, fine powder.
Solubility: Practically insoluble in water.

IDENTIFICATION
A. To 0.80 g in a mortar, add 10 ml of water R and 0.5 ml of phph solution and mix. The suspension turns red. On addition of 17.5 ml of 1 M hydrochloric acid , the suspension becomes colourless without effervescing. The red colour occurs again when the mixture is triturated for 1 min. On addition of a further 6 ml of 1 M hydrochloric acid and triturating, the solution becomes colourless.
B. Dissolve about 0.1 g in dilute hydrochloric acid and dilute to 10 ml with water . 5 ml of the solution give reaction of calcium.

TESTS
Matter insoluble in hydrochloric acid: Maximum 0.5 per cent.
Dissolve 2.0 g in 30 ml of hydrochloric acid. Boil the solution and filter. Wash the residue with hot water. The residue weighs a maximum of 10 mg.
Carbonates: Maximum 5.0 per cent of CaCO3.
Chlorides: Maximum 330 ppm.
Sulphates: Maximum 0.4 per cent.
Arsenic: Maximum 4 ppm.
Magnesium and alkali metals: Maximum 4.0 per cent calculated as sulphates.
Heavy metals: Maximum 20 ppm.

Specifications of Calcium Hydroxide FCC Food Grade
Slaked Lime
Ca(OH)2 Formula weight 74.10
INS: 526 CAS: 1305-62-0

DESCRIPTION
Calcium Hydroxide occurs as a white powder. One gram dissolves in 630 mL of water at 25C, and in 1300 mL of boiling water. It is soluble in glycerin and in a saturated solution of sucrose but insoluble in alcohol.
Function: Buffer; neutralizing agent; firming agent.

REQUIREMENTS
Identification
A. Mix a sample with from 3 to 4 times its weight of water. The sample forms a smooth magma. The clear, supernatant liquid from the magma is alkaline to litmus.
B. Mix 1 g of sample with 20 mL of water, and add sufficient glacial acetic acid to effect solution. The resulting solution gives positive tests for Calcium.
Assay: Not less than 95.0% and not more than 100.5% of Ca(OH)2.
Acid-Insoluble Substances: Not more than 0.5%.
Arsenic: Not more than 3 mg/kg.
Carbonate: Passes test.
Fluoride: Not more than 0.005%.
Lead: Not more than 2 mg/kg.
Magnesium and Alkali Salts: Not more than 4.8%.

Specifications of Calcium Hydroxide Analytical Reagent
Ca(OH)2
Formula Wt 74.09
CAS Number 1305-62-0

MAXIMUM ALLOWABLE
Insoluble in hydrochloric acid: 0.03%
Chloride (Cl): 0.03%
Sulfur compounds (as SO4): 0.1%
Heavy metals (as Pb): 0.003%
Iron (Fe): 0.05%
Magnesium (Mg): 0.5%
Potassium (K): 0.05%
Sodium (Na): 0.05%
Strontium (Sr): 0.05%

The MSDS-SDS Hazard Statement of Hydrated Lime, Slaked Lime, Calcium Hydroxide:

Calcium Hydroxide SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 26-Jun-21

Product Name & Other Names: Calcium hydroxide or Slaked lime or Calcium hydrate or Hydrated lime.
CAS No.: 1305-62-0
EINECS EC Number: 215-137-3
Molecular Weight: 74.09
Chemical Formula: Ca(OH)2
Relevant uses and uses advised against (if any): Laboratory and Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation Category (H315)
Serious eye damage/eye irritation Category 1 (H318)
Acute toxicity, inhalation Category 4 (H332)
Specific target organ toxicity - single exposure, respiratory (Category 3) (H335)
Hazardous to the aquatic environment, acute hazard Category 3 (H402)

Hazard Statements:
H315: Causes skin irritation.
H318: Causes serious eye damage.
H332: Harmful if inhaled.
H335: May cause respiratory irritation.
H402: Harmful to aquatic life.

Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P262: Do not get in eyes, on skin, or on clothing.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P302+352: IF ON SKIN: Wash with soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P501: Dispose of contents/ container to an approved waste disposal plant.

Product Name & Other Names: Calcium hydroxide or Slaked lime or Calcium hydrate or Hydrated lime.
CAS No.: 1305-62-0
EINECS EC Number: 215-137-3

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician immediately.
Ingestion: DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Call a physician immediately.
Skin Contact: In case of contact with Calcium Hydroxide or Slaked Lime, wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Call a physician immediately.
Eye Contact: Immediately flush eyes with gentle but large stream of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Call a physician immediately.

Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use any means suitable for extinguishing surrounding fire.
Extinguishing Media Not recommended: None specified.
Special hazards arising from the substance or mixture: Calcium oxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Use method that does not generate dust. Do not flush caustic residues to the sewer. Carefully pick up solid with minimum of dusting and collect in metal container with covers with disposal.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and acids. Avoid maleic anhydride, nitro ethane, nitro methane, nitro paraffin, nitro propane, phosphorus.

Airborne Exposure Limits: -OSHA Permissible Exposure Limit (PEL):
15 mg/m3 (total dust), 5 mg/m3 (respirable fraction)
-ACGIH Threshold Limit Value (TLV): 5 mg/m3
CALCIUM HYDROXIDE (LIME) WEL (Workplace Exposure Limit) 5 mg/m3
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a full face piece particulate respirator (NIOSH type N100 filters) may be worn for up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. If oil particles (e.g., lubricants, cutting fluids. glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron, or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: Calcium Hydroxide or Slaked Lime white crystals or powder.
Odor: Odorless.
Odor threshold: Not available.
pH: 12.4 (saturated solution)
Relative density: around 2.24
Boiling Point: Decomposes.
Melting Point: 580C (1076F)
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: 0.185 g/100 cc water @ 0C.
Viscosity: Not available.
Molecular Weight: 74.09
Chemical Formula: Ca(OH)2.

Stability: Stable under ordinary conditions of use and storage. Readily absorbs carbon dioxide from air to form calcium carbonate.
Hazardous Decomposition Products: Decomposition (580C; 1076F) to form Calcium Oxide.
Hazardous Polymerization: Will not occur.
Incompatibilities: Violent reactions with maleic anhydride, nitro ethane, nitro methane, nitro paraffin, nitro propane, phosphorus. As a strongly alkaline material, it is incompatible with acids.

Oral Rat LD50: 7340 mg/kg; eye rabbit, Standard Draize, 10 mg, severe.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Mutagenic Effects: Investigated as a mutagen.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

LD50 Oral - Rat - female: > 2.000 mg/kg.
LC50 Inhalation - Rat - male and female - 4 h: > 6,04 mg/l
LD50 Dermal - Rabbit - male and female: > 2.500 mg/kg
Persistence and Degradability: Unlikely to persist.
Mobility: Likely to be mobile.
Bioaccumulation/ Accumulation: Not expected to significantly bio accumulate.
Results of PBT and vPvB assessment: No data available for assessment.

Although not a listed RCRA hazardous waste, Calcium Hydroxide or Slaked Lime may exhibit one or more characteristics of a hazardous waste and require appropriate analysis to determine specific disposal requirements. Dispose of container and unused contents in accordance with federal, state, and local requirements.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
Sea Transport IMDG/IMO: Not dangerous goods.
Air Transport IATA/ICAO: Not dangerous goods.

USA:
California Proposition 65: Not listed.
SARA 311/312: Acute health hazard. See section 2.

Hydrated Lime, Slaked Lime, Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Hydrated Lime, Slaked Lime, Calcium Hydroxide USP BP Ph Eur IP Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 1305-62-0.

Hydrated Lime, Slaked Lime, Manufacturers, Suppliers, Exporters, Wholesalers: