Specifications, Uses, SDS of Glycerol Monostearate Manufacturers

	King of Chemicals
Specifications, Properties, Uses, SDS of Glycerol Monostearate BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 31566-31-1.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of bbbbb for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

CAS Number: 31566-31-1, EINECS EC Number: 250-705-4, Molecular Formula: C21H42O4 , Molecular Weight: 358.56, HS Code 29157030

Glycerol monostearate, commonly known as GMS is a monoglyceride commonly used as an emulsifier in foods. It is a white, odorless, and sweet-tasting flaky powder that is hygroscopic. Chemically it is the glycerol ester of stearic acid. GMS is a food additive used as a thickening, emulsifying, anticaking, and preservative agent; an emulsifying agent for oils, waxes, and solvents; a protective coating for hygroscopic powders; a solidifier and control release agent in pharmaceuticals; and a resin lubricant. Glyceryl monostearate (GMS) is an effective emulsifier used in the baking industry. It is also used in cosmetics and hair-care products. It can also be used as an additive in plastic.

Glycerol Monostearate 40-55 BP Ph Eur Grade
CAS 31566-31-1
Action and use: Excipient.

DEFINITION
Mixture of monoacylglycerols, mainly monostearoylglycerol, together with variable quantities of di- and triacylglycerols. It is obtained by partial glycerolysis of vegetable oils mainly containing triacylglycerols of palmitic (hexadecanoic) or stearic (octadecanoic) acid or by esterification of glycerol with stearic acid. The fatty acids may be of vegetable or animal origin.
Content:
monoacylglycerols: 40.0 per cent to 55.0 per cent;
diacylglycerols: 30.0 per cent to 45.0 per cent;
triacylglycerols: 5.0 per cent to 15.0 per cent.

CHARACTERS
Appearance: Hard, waxy mass or unctuous powder or flakes, white or almost white.
Solubility: Practically insoluble in water, soluble in ethanol (96 per cent) at 60 °C.

IDENTIFICATION
First identificationıC, D.
Second identificationıA, B.
A. Melting point: 54C to 66C.
Introduce the melted substance into the capillary tubes and allow to stand for 24 h in a well-closed container.
B. Thin-layer chromatography: To pass the test.
C. Composition of fatty acids (see Tests) according to the type stated on the label.
D. It complies with the limits of the assay (monoacylglycerol content).

TESTS
Acid value: Maximum 3.0, determined on 1.0 g.
Use a mixture of equal volumes of ethanol (96 per cent) R and toluene R as solvent and heat gently.
Iodine value: Maximum 3.0.
Saponification value: 158 to 177, determined on 2.0 g. Carry out the titration with heating.
Free glycerol: Maximum 6.0 per cent.
Composition of the fatty-acid fraction of the substance:
Glycerol Monostearate Type I: Stearic Acid is 40-60% and sum of contents of palmic and stearic acids is minimum 90%.
Glycerol Monostearate Type II: Stearic Acid is 60-80% and sum of contents of palmic and stearic acids is minimum 90%.
Glycerol Monostearate Type III: Stearic Acid is 80-99% and sum of contents of palmic and stearic acids is minimum 96%.
Nickel: Maximum 1 ppm.
Water: Maximum 1.0 per cent, determined on 1.00 g. Use pyridine R as the solvent and heat gently.
Total ash: Maximum 0.1 per cent.

Glycerol Monostearate SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 19-Jul-21

Product Name & Other Names: Glycerol monostearate.
CAS Number: 31566-31-1
EINECS EC Code: 250-705-4
Molecular Formula: C21H42O4
Molecular Weight: 358.56
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Product Name & Other Names: Glycerol monostearate.
CAS Number: 31566-31-1
EINECS EC Code: 250-705-4

Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.

Flammability of the Product: May be combustible at high temperature.
Products of Combustion: Oxides of Carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Do not inhale dust, mist, or gas. Avoid dust formation. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, acids. Sensitive to light.

Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. There is a blanket recommendation of 10 mg/m3 for inspirable dusts or mists when limits have not otherwise been established.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume, or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Physical state and appearance: Solid off-white powder.
Odor: Fatty odor.
Odor threshold: Not available.
pH: Not available.
Relative density: 0.9 to 0.915
Melting point: 54 - 66C
Initial boiling point and boiling range: Not available.
Flash point: 204C - closed cup
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Insoluble in water.
Viscosity: Not available.
Molecular Formula: C21H42O4
Molecular Weight: 358.56

Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials, Excess heat, light.
Incompatibility with various substances: Avoid high temperatures, sparks, open flames, and moisture. Avoid contact with strong oxidizing agents and acids.
Polymerization: Will not occur.
Hazardous decomposition products: Hazardous decomposition products formed under fire conditions.

LD50 Oral - Rat - 5,000 mg/kg(Stearic acid monoester with glycerol)
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Toxicity to fish: Acute fish toxicity: LC50 >100 mg product/l
Products of Biodegradation: The product itself and its products of degradation are not toxic.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
Sea Transport IMDG/IMO: Not dangerous goods.
Air Transport IATA/ICAO: Not dangerous goods.

USA Regulations:
SARA 311/312 Hazards: No SARA Hazards
California Prop 65: California No Significant Risk Level: None of the chemicals in this product are listed.

Glycerol Monostearate Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Glycerol Monostearate BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 31566-31-1.

Glycerol Monostearate Manufacturers, Suppliers, Exporters, Wholesalers: