Specifications, Uses, SDS of Mono and Di Glycerides Manufacturers

	King of Chemicals Manufacturers
Specifications, Properties, Uses, SDS of Mono and Diglycerides USP NF FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 67701-32-0 and 67254-73-3.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Mono and Diglycerides USP NF FCC Food Grade for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

The Properties, Specifications, Monograph and Uses of Mono and Diglycerides:

Mono- and Di-glycerides USP NF Grade Specifications
Mono- and Di-glycerides is a mixture of glycerol mono- and di-esters, with minor amounts of tri-esters, of fatty acids from edible oils. It contains not less than 40.0 percent of monoglycerides. The monoglyceride content is not less than 90.0 percent and not more than 110.0 percent of the value indicated in the labeling. It may contain suitable stabilizers.

Acid value: not more than 4.
Hydroxyl value: not less than 90.0% and not more than 110.0% of the value indicated in the labeling.
Iodine value: not less than 90.0% and not more than 110.0% of the value indicated in the labeling. If the value stated in the labeling is less than 10, the Iodine value is not more than 10.
Saponification value: not less than 90.0% and not more than 110.0% of the value indicated in the labeling.
Residue on ignition: not more than 0.1%.
Arsenic: 3 ppm.
Heavy metals: 0.001%.
Limit of free glycerin: To pass the test.
Assay for monoglycerides: To pass the test.

DESCRIPTION
Mono- and Diglycerides occur as a substance that varies in consistency from yellow liquids through white- to pale yellow colored plastics to hard, ivory-colored solids. They consist of mixtures of glycerol mono- and diesters, with minor amounts of triesters, and of edible fats or oils or edible fat-forming fatty acids. They are insoluble in water, but are soluble in alcohol, in ethyl acetate, and in chloroform and other chlorinated hydrocarbons.
Function: Emulsifier; stabilizer.

REQUIREMENTS
Acid Value: Not more than 6.
Arsenic: Not more than 3 mg/kg.
Free Glycerin: Not more than 7.0%.
Lead: Not more than 2 mg/kg.
Residue on Ignition: Not more than 0.5%.
The following specifications should conform to the representations of the vendor: Hydroxyl Value, Iodine Value, 1-Monoglyceride Content, Saponification Value, and Total Monoglycerides.

Monoglyceride and Diglyceride or Mono glyceride and Di-glyceride SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 03-April-25

Product Name & Other Names: Mono glyceride and Di glyceride or Mono glyceride and Diglyceride.
CAS Number: 67701-32-0 also quoted is 67254-73-3
EINECS EC Code: -
Relevant uses and uses advised against (if any): Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Product Name & Other Names: Mono glyceride and Di glyceride or Mono glyceride and Diglyceride.
CAS Number: 67701-32-0
EINECS EC Code: -

Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.

Flammability of the Product: Non-flammable.
Products of Combustion: Oxides of Carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels low.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures low.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Physical state and appearance: Solid off-white powder.
Odor: Fatty odor.
Odor threshold: No information found.
pH: No information found.
Relative density: around 0.9
Melting point: About 66C
Initial boiling point and boiling range: No information found.
Flash point: No information found.
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No data found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility: Practically insoluble in water. forms emulsion.
Viscosity: No information found.

Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials, Moisture
Incompatibility with various substances: Avoid high temperatures, sparks, open flames, and moisture. Avoid contact with strong oxidizing agents.
Polymerization: Will not occur.

LD50 Oral - Rat - No information found.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No information found.
Mutagenic Effects: No information found.
Developmental Toxicity: No information found.
Reproductive Effects: No information found.

Toxicity to fish: No information found.
Persistence and Degradability: No information found.
Mobility: No data found.
Bioaccumulation/ Accumulation: No information found.
Results of PBT and vPvB assessment: No information found.

Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations. Follow all the pollution control laws.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
Air Transport IATA/ICAO: Not controlled.
Sea Transport IMDG/IMO: Not controlled.

USA:
SARA 311/312 Hazards: No SARA hazards.
California Prop. 65 Components: Not listed.

DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.

Mono and Diglycerides Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Mono and Diglycerides USP NF FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 67701-32-0 and 67254-73-3.

Mono and Diglycerides Manufacturers, Suppliers, Exporters, Wholesalers: