Specifications, Uses, SDS of Stannous Chloride Manufacturers

	King of Chemicals Manufacturers
Specifications, Properties, Uses, SDS of Tin Chloride or Stannous Chloride Anhydrous Dihydrate BP Ph Eur Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 10025-69-1 for Dihydrate, 7772-99-8 for Anhydrous.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Stannous Chloride Anhydrous Dihydrate for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

Stannous Chloride Manufacturer Supplier Exporter

Tin Chloride or Stannous Chloride Anhydrous Dihydrate CAS Number 10025-69-1 for Dihydrate, 7772-99-8 for Anhydrous

The Properties, Specifications, Monograph and Uses of Tin Chloride or Stannous Chloride Anhydrous Dihydrate:

CAS Number 10025-69-1 for Dihydrate,7772-99-8 for Anhydrous, EINECS EC Number 231-868-0, HS Code 28273990 or 28271090; Molecular Weight 225.63 g/mol (dihydrate) & 189.60 g/mol (anhydrous), Molecular Formula: SnCl2.2H2O

Tin(II) chloride, also known as stannous chloride, is a white crystalline solid with the formula SnCl2. It forms a stable dihydrate, but aqueous solutions tend to undergo hydrolysis, particularly if hot. SnCl2 is widely used as a reducing agent. Tin(II) chloride is used as a mordant in textile dyeing because it gives brighter colours with some dyes. In recent years, an increasing number of tooth paste brands has been adding Tin(II) chloride as protection against enamel erosion to their formula. It also finds a use as a catalyst. Stannous chloride is also added as a food additive with E number E512 to some canned and bottled foods, where it serves as a color-retention agent and antioxidant.

Stannous Chloride Dihydrate BP Ph Eur Grade Specifications:
SnCl2,2H2O --- 225.6 --- CAS 10025-69-1
DEFINITION
Content: 98.0 per cent to 102.0 per cent.

CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals, efflorescent in air.
Solubility: Freely soluble in water (the solution becomes cloudy after standing or on dilution), freely soluble in ethanol (96 per cent). It dissolves in dilute hydrochloric acid.

IDENTIFICATION
A. To 1 mL of solution S1 (see Tests) add 5 mL of water and 0.05 mL of mercuric chloride solution. A blackish-grey precipitate is formed.
B. Dissolve 1.0 g in 3.0 ;mL of water. Add 0.5 mL of dilute sodium hydroxide solution to the cloudy solution; a yellowish flocculent precipitate is formed. Add 6.5 mL of water. To 1.0 mL of the previously shaken suspension add 1.0 mL of strong sodium hydroxide solution; the precipitate dissolves and the resulting solution is clear and colourless.
C. Dissolve 10 mg in 2 mL of dilute nitric acid. The solution gives reaction (a) of chlorides.

TESTS
Solution S1: To 0.40 g add 1 mL of dilute hydrochloric acid and dilute to 20 mL with distilled water.
Solution S2: Dissolve 1.0 g in dilute hydrochloric acid and dilute to 30 mL with the same acid. Heat to boiling. Add 30 mL of thioacetamide solution and boil for 15 min (solution A). Take 5 mL, filter and heat the filtrate to boiling. Add 5 mL of thioacetamide solution and boil for 15 min. If a precipitate is formed, add the remainder of solution A (solution A') to the mixture. Add 10 mL of thioacetamide solution and boil. Repeat the series of operations from “Take 5 mL” until a precipitate is no longer formed on addition of thioacetamide solution to the filtrate obtained from the 5 mL of solution A (solution A', solution A', etc. respectively). If no precipitate is formed or if no more precipitate is formed combine the solution obtained with the remainder of solution A (solution A', solution A', etc. respectively), filter and wash the precipitate with 10 mL of water. Heat the filtrate until the resulting vapour no longer turns a moistened piece of lead acetate paper blackish-grey. Allow to cool and dilute to 50 mL with water.
Appearance of solution: The solution is clear and colourless.
Dissolve 10.0 g in dilute hydrochloric acid and dilute to 20 mL with the same acid.
Substances not precipitated by thioacetamide: Maximum 0.2 per cent.
Evaporate 25 mL of solution S2 to dryness and ignite at 600±50C. The residue weighs a maximum of 1 mg.
Sulfates: Maximum 500 ppm, determined on solution S1.
Iron: Maximum 100 ppm.
Dilute 5 mL of solution S2 to 10 mL with water.

ASSAY
Dissolve 0.100 g in 50 mL of water, freed from oxygen by purging with carbon dioxide or nitrogen for 15 min. Add 1.5 mL of hydrochloric acid R1, 5 g of sodium potassium tartrate, 10 g of sodium hydrogen carbonate and 1 mL of starch solution. Titrate immediately with 0.05 M iodine. Carry out a blank titration.
1 mL of 0.05 M iodine is equivalent to 11.28 mg of SnCl2,2H2O.

Stannous Chloride FCC Food Grade Specifications
Tin Dichloride
SnCl2 Formula wt, anhydrous 189.60
SnCl2-2H2O Formula wt, dihydrate 225.63
INS: 521 CAS: anhydrous 7772-99-8
CAS: dihydrate 10025-0969-091

DESCRIPTION
Stannous Chloride occurs as white or colorless crystals. It is anhydrous or contains two molecules of water of hydration. It is very soluble in water, and it is soluble in alcohol and in
glacial acetic acid.
Function: Reducing agent; antioxidant.

REQUIREMENTS
Identification:
A. Add mercuric chloride TS, drop-wise, to a 1:20 solution of sample in 2.7 N hydrochloric acid. A white or gray-white precipitate forms.
B. A 1:20 aqueous solution gives positive tests for Chloride.
Assay: Not less than 99.0% and not more than 101.0% of SnCl2, or not less than 98.0% and not more than 102.2% of SnCl2-2H2O.
Iron: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Solubility in Hydrochloric Acid: Passes test.
Substances Not Precipitated by Sulfide: Not more than 0.05%.
Sulfate: Passes test.

Specifications of Stannous Chloride Dihydrate Analytical Reagent Grade
Tin (II) Chloride Dihydrate

The MSDS-SDS Hazard Statement of Tin Chloride or Stannous Chloride Anhydrous Dihydrate:

Stannous Chloride Dihydrate Anhydrous SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 27-Jul-21

Product Name & Other Names: Stannous Chloride Dihydrate Anhydrous.
CAS No.: 10025-69-1 for Dihydrate & 7772-99-8 for Anhydrous.
EINECS EC-No.: 231-868-0
Molecular Weight: 225.63 g/mol (dihydrate) [& 189.60 g/mol (anhydrous)]
Chemical Formula: SnCl2.2H2O, [SnCl2 for anhydrous]
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral Category 4, H302
Skin corrosion/irritation Category 1A, B, C, H314
Sensitization, Skin Category 1, H317
Acute toxicity, inhalation Category 4, H332
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335
Hazardous to the aquatic environment, long-term hazard Category 1, H410

Hazard statements:
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H332: Harmful if inhaled.
H335: May cause respiratory irritation.
H410: Very toxic to aquatic life with long lasting effects.

Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P391: Collect spillage.
P405: Store locked up.
P501: Dispose of contents/ container to an approved waste disposal plant.

Product Name & Other Names: Stannous Chloride Dihydrate Anhydrous.
CAS No.: 10025-69-1 for Dihydrate & 7772-99-8 for Anhydrous.
EINECS EC-No.: 231-868-0

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Flammability of the Product: Non-flammable.
Products of Combustion: Hydrogen chloride gas, Tin/tin oxides.
Fire: Stannous Chloride Dihydrate is not considered to be a fire hazard.
Explosion: Stannous Chloride Dihydrate is Slightly explosive in presence of heat & Metals.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Extinguishing Media Not recommended: None specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: It is a corrosive solid. Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Precautions for safe handling: Do not ingest. Do not breathe dust. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, metals & acids.

Airborne Exposure Limits:
USA ACGIH ACGIH TWA (mg/m³): 2 mg/m³
USA OSHA OSHA PEL (TWA) (mg/m³): 2 mg/m³
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: Stannous Chloride Dihydrate is white powder or crystals.
Odor: It is odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: around 2.71
Boiling Point: 652C.
Melting Point: 37 - 38C.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is freely soluble in water.
Viscosity: Not available.
Molecular Weight: 225.63 g/mol dihydrate & 189.60 g/mol anhydrous
Molecular Formula: SnCl2-2H2O Dihydrate & SnCl2 for anhydrous.

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits toxic chlorine or hydrogen chloride fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, metals & acids. Also incompatible with potassium, Bromine trifluoride, Hydrazine, Ethylene oxide, Metals, organic nitrates sodium, hydrazine, nitromethane, acetylene, sodium hypobromite, alcohols. Halogens.
Conditions to Avoid: Incompatibles and moisture.

Toxicity data: LD50 oral rat: 700 mg/kg.
Carcinogenic Effects: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, NTP, OSHA.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

LC50 other aquatic organisms 1: 37 mg/l (24 h; Daphnia magna; Anhydrous form)
EC50 other aquatic organisms 1: 50.1 mg/l (96 h; Crangon sp.; Anhydrous form)
EC50 other aquatic organisms 2: 71.8 mg/l (48 h; Crangon sp.; Anhydrous form)
Environmental Toxicity: Harmful to aquatic life in exceptionally low concentrations.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with legal requirements.

Land Transport DOT USA, TDG Canada & ADR/RID Europe:
UN number: 3260 Class: 8 Packing group: III
Proper shipping name: Corrosive solid, acidic, inorganic, n.o.s. (Stannous chloride).
Sea Transport IMDG/IMO:
UN number: 3260 Class: 8 Packing group: III EMS-No: F-A, S-B
Proper shipping name: Corrosive solid, acidic, inorganic, n.o.s. (Stannous chloride).
Air Transport ICAO/IATA:
UN number: 3260 Class: 8 Packing group: III EMS-No: F-A, S-B
Proper shipping name: Corrosive solid, acidic, inorganic, n.o.s. (Stannous chloride).

USA:
SARA 311/312 Hazards: Acute Health Hazard. See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Tin Chloride or Stannous Chloride Anhydrous Dihydrate Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals. Check.

Specifications, Properties, Uses, SDS of Tin Chloride or Stannous Chloride Anhydrous Dihydrate BP Ph Eur Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 10025-69-1 for Dihydrate, 7772-99-8 for Anhydrous.

Tin Chloride or Stannous Chloride Anhydrous Dihydrate Manufacturers, Suppliers, Exporters, Wholesalers: