Specifications, Uses, SDS of Methylparaben Sodium Manufacturers

	King of Chemicals
Specifications, Properties, Uses, SDS of Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben USP NF BP Ph Eur Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 5026-62-0.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

Methylparaben sodium manufacturer supplier exporter

Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben CAS Number 5026-62-0

The Properties, Specifications, Monograph and Uses of Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben:

CAS Number: 5026-62-0, EINECS EC Number: 225-714-1, Molecular Formula: C8H7NaO3, Molecular Weight: 174.13, HS Code 29163190 or 29163990

Methylparaben sodium is the sodium salt form of methylparaben. Methylparaben has been used as a preservative used in the food, cosmetic, and pharmaceutical industries for over 50 years. Sodium methyl hydroxybenzoate or Sodium methyl paraben is a food additive with the E number E219 which is used as a preservative.

Methylparaben Sodium USP NF Grade Specifications:
C8H7NaO3 --- 174.13
Benzoic acid, 4-hydroxy-, methyl ester, sodium salt;
Methyl p-hydroxybenzoate, sodium salt;
Sodium 4-methoxycarbonylphenolate CAS 5026-62-0

DEFINITION
Methylparaben Sodium contains NLT 95.0% and NMT 102.0% of methylparaben sodium (C8H7NaO3), calculated on the anhydrous basis.

IDENTIFICATION
A.
Standard: 0.5 g of USP Methylparaben RS
Sample: 0.5 g
Analysis: Dissolve the Sample in 5 mL of water. Acidify with hydrochloric acid, and filter the resulting precipitate. Wash the precipitate with water, and dry it over silica gel for 5 h. Repeat with the Standard.
Acceptance criteria: The IR absorption spectrum of a mineral oil dispersion of the Sample exhibits maxima only at the same wavelengths as those of a similar preparation of the Standard.
B.
Sample solution: Ignite 0.3 g of Methylparaben Sodium, cool, and dissolve the residue in about 3 mL of 3 N hydrochloric acid.
Acceptance criteria: A platinum wire dipped in the Sample solution imparts an intense, persistent yellow color to a nonluminous flame.

Specifications of Sodium Methyl Hydroxybenzoate BP Grade
Sodium Methylparaben
Sodium Methyl Parahydroxybenzoate, Ph Eur Specifications
C8H7NaO3 --- 174.1 --- 5026-62-0
Action and use: Antimicrobial preservative.

DEFINITION
Sodium methyl parahydroxybenzoate contains not less than 99.0 per cent and not more than the equivalent of 102.0 per cent of sodium 4-(methoxycarbonyl)phenolate, calculated with reference to the anhydrous substance.

CHARACTERS
A white or almost white, crystalline powder, freely soluble in water, sparingly soluble in alcohol, practically insoluble in methylene chloride.

IDENTIFICATION
First identification A, B, E.
Second identification A, C, D, E.
A. Dissolve 0.5 g in 50 ml of water. Immediately add 5 ml of hydrochloric acid. Filter and wash the precipitate with water. Dry under vacuum at 80C for 2 h. The precipitate obtained melts at 125C to 128C.
B. Examine the precipitate obtained in identification test A by infrared absorption spectrophotometry, comparing with the spectrum obtained with methyl parahydroxybenzoate CRS.
C. Examine the chromatograms obtained in the test for related substances. The principal spot in the chromatogram obtained with test solution (b) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (c).
D. To about 10 mg in a test-tube add 1 ml of sodium carbonate solution, boil for 30 s and cool. Add 5 ml of aminopyrazolone solution and 1 ml of potassium ferricyanide solution and mix. An orange to red colour develops.
E. To 1 ml of solution S (see Tests) add 1 ml of water. The solution gives reaction (a) of sodium.

TESTS
Solution S: Dissolve 5.0 g in carbon dioxide-free water prepared from distilled water and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S examined immediately after preparation is clear and not more intensely coloured than reference solution.
pH: Dilute 1 ml of solution S to 100 ml with carbon dioxide-free water. The pH of the solution is 9.5 to 10.5.
Related substances: To pass the test.
Chlorides: To 10 ml of solution S, add 30 ml of water and 1 ml of nitric acid and dilute to 50 ml with water. Shake and filter. Dilute 10 ml of the filtrate to 15 ml with water. The solution complies with the limit test for chlorides (350 ppm). Prepare the standard using 14 ml of chloride standard solution (5 ppm Cl) to which 1 ml of water has been added.
Sulphates: To 25 ml of solution S, add 5 ml of distilled water and 10 ml of hydrochloric acid and dilute to 50 ml with distilled water. Shake and filter. Dilute 10 ml of the filtrate to 15 ml with distilled water. The solution complies with the limit test for sulphates (300 ppm).
Heavy metals: 2.0 g complies with limit test C for heavy metals (10 ppm). Prepare the standard using 2 ml of lead standard solution (10 ppm Pb).
Water: Not more than 5.0 per cent, determined on 0.500 g by the semi-micro determination of water.

The MSDS-SDS Hazard Statement of Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben:

Sodium methyl paraben or Sodium methyl hydroxybenzoate or Methylparaben sodium SDS Safety Data Sheet
MSDS, Material Safety Data Sheet 21-Jul-21

Product Name & Other Names: Sodium methylparaben, Sodium methyl paraben or Sodium methyl hydroxybenzoate or Methylparaben sodium.
CAS Number: 5026-62-0
EINECS EC Number: 225-714-1
Molecular Formula: C8H7NaO3
Molecular Weight: 174.13
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per the letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, oral (Category 4), H302
Skin corrosion/irritation (Category 2), H315
Serious eye damage (Category 1), H318
Hazardous to the aquatic environment, acute hazard (Category 2), H401

Hazard statements:
H302: Harmful if swallowed
H315: Causes skin irritation.
H318: Causes serious eye damage.
H401: Toxic to aquatic life.

Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of contents/ container to an approved waste disposal plant.

Product Name & Other Names: Sodium methylparaben, Sodium methyl paraben or Sodium methyl hydroxybenzoate or Methylparaben sodium.
CAS Number: 5026-62-0
EINECS EC Number: 225-714-1

Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid(s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes, and leather goods (e.g., watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING.

Fire and Explosion Hazards: Not considered flammable but may burn at high temperatures.
Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. Use water spray to cool unopened containers.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Keep away from sources of ignition. Take measures to prevent the build-up of electrostatic charge.

Exposure limit(s): Contains no substances with occupational exposure limit values.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Appearance: It is a white, odorless granules or powder
Odor: None
Odor threshold: Not available.
pH: 9.7 to 10.3 @ 1 gm/l
Relative density: around 1.42
Freezing/Melting Point/Range: >125C
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor Pressure: Negligible @ 20C
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Soluble in water.
Viscosity: Not available.
Molecular Formula: C8H7NaO3
Molecular Weight: 174.13

Stability and Reactivity: Stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: Oxidizing agents. Avoid excessive heat, spark, flame, ignition, and moisture.
Hazardous Decomposition Products: High temperature operations will generate carbon oxide and fumes.

Acute Toxicity (Oral LD50): > 5,000 mg/kg Rat
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Toxicity to fish: No information available.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: Bioaccumulation is not expected.
Results of PBT and vPvB assessment: No data available for assessment.

Do not wash the material down drain. Put uncontaminated material back into the process if possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not regulated for transport.
Air Transport IATA/ICAO: Not regulated for transport.
Sea Transport IMDG/IMO: Not regulated for transport.

USA Regulations:

SARA 311/312 Hazards: Acute Health Hazard. See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben USP NF BP Ph Eur Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 5026-62-0.

Methylparaben sodium or Sodium methyl hydroxybenzoate or Sodium methyl paraben Manufacturers, Suppliers, Exporters, Wholesalers: