Specifications, Uses, SDS of Copper Chloride Manufacturers

	King of Chemicals
Specifications, Properties, Uses, SDS of Cuprous Chloride, Cupric Chloride Anhydrous Dihydrate - Copper Chloride USP Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 10125-13-0, 7447-39-4, 7758-89-6.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Cuprous Chloride, Cupric Chloride Anhydrous Dihydrate - Copper Chloride for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

Cupric Chloride Dihydrate Manufacturer Supplier Exporter

Cupric Chloride Anhydrous Manufacturer Supplier Exporter

Cuprous Chloride Manufacturer Supplier Exporter

Cuprous Chloride, Cupric Chloride Anhydrous Dihydrate Copper Chloride CAS Number 10125-13-0, 7447-39-4, 7758-89-6

The Properties, Specifications, Monograph and Uses of Cuprous Chloride, Cupric Chloride Anhydrous Dihydrate Copper Chloride:

Copper Chloride or Cupric Chloride Dihydrate: CAS No.: 10125-13-0, EINECS: 231-210-2, HS Code: 28273940 or 28273990, Molecular Weight: 170.48, Chemical Formula: CuCl2-2H2O

Copper Chloride or Cupric Chloride Anhydrous: CAS No.: 7447-39-4, EINECS: 231-210-2; HS Code: 28273940 or 28273990, Molecular Weight: 134.45, Chemical Formula: CuCl2

Cuprous Chloride: CAS Number 7758-89-6, EINECS EC Number 231-842-9, HS Code 28273940, Molecular Weight 99, Chemical Formula CuCl

Copper(II) chloride or Cupric Chloride is the chemical compound with the chemical formula CuCl2. The anhydrous form is yellowish brown but slowly absorbs moisture to form a blue-green dihydrate. A major industrial application for copper(II) chloride is as a co-catalyst with palladium(II) chloride in the Wacker process. It is used in pharmaceutical industries.

Cupric Chloride Dihydrate or Copper Chloride Dihydrate:
Chemical Name: Copper(II) chloride dihydrate
Synonyms: Coppertrace; Copper(ic) chloride; Cupric chloride 2H2O; Copric chloride dihydrate; Copper(II) Chloride 2H2O; Cupric chloride 2-Hydrate; Copper dichloride dihydrate.

General Specifications of Cupric Chloride Dihydrate:
Assay as CuCl2 2H2O: 99% minimum.
Appearance: Green to Bluish-Green
Total Copper as Cu: 36.9% minimum.
Nitrate as Cu(NO3)2: 0.1% maximum.
Moisture: 3% maximum.
Free HNO3: 0.05 % maximum.
Iron as ‘Fe’: 0.005% maximum.
pH 5% Solution: 3 - 4
Matter Insoluble in H2O: 0.01% maximum.

Cupric Chloride Dihydrate Analytical Reagent Grade
Copper (II) Chloride Dihydrate
CuCl2- 2H2O
Formula Weight 170.48
CAS Number 10125-13-0

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Nitrate (NO3): 0.015%
Sulfate (SO4): 0.005%
Calcium (Ca): 0.005%
Iron (Fe): 0.005%
Nickel (Ni): 0.01%
Potassium (K): 0.01%
Sodium (Na): 0.02%

Cupric Chloride USP
CuCl2-2H2O -- 170.48
Copper chloride (CuCl2) dihydrate.
Copper(2+) chloride dihydrate [CAS 10125-13-0].
Anhydrous 134.45 [CAS 7447-39-4].

Cupric Chloride contains not less than 99.0 percent and not more than 100.5 percent of CuCl2, calculated on the dried basis.

Identification: A solution (1 in 20) responds to the tests for Chloride and for Copper.
Loss on drying: Dry it at 105 for 16 hours: it loses between 20.9% and 21.4% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 100 mL of water and 2 mL of hydrochloric acid, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and filter through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C, the residue weighs not more than 1.0 mg (0.01%).
Sulfate: (0.005%).
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.005%.
Limit of nickel: The limit is 0.01%.
Organic volatile impurities: meets the requirements.

Cupric Chloride Anhydrous or Copper Chloride Anhydrous:
Chemical Name: Copper(II) chloride
Synonyms: Coppertrace; Copper(ic) chloride; Cupric chloride; Copper(II) chloride; Copric chloride; Copper dichloride; CuCl2 (anhydrous)

Specifications of Chemically Pure Anhydrous Cupric Chloride:
Appearance: Fine Brownish Powder
Assay: 98.00 % to 99.8%
Copper: 46% to 46.4%
Cuprous Chloride: 0.05 % maximum.
Free Moisture: 1.00 % maximum.
Water Insoluble: 0.10 % maximum.
Iron: 0.10 % maximum.
Sulphate: 0.06 % maximum.
Lead: 10 ppm maximum.
Arsenic: 10 ppm maximum.
Zinc: 20 ppm maximum.
Nickel: 20 ppm maximum.

Specifications of Cuprous Chloride, CuCl:
Assay as CuCl : 98.00% minimum.
Description: Off white to greyish white powder.
Cupric Copper as CuCl2: 0.50% maximum.
Total Cu: 63.5% minimum.
Acid Insoluble: 200 ppm maximum.
Iron: 200 ppm maximum.
Melting Point: 422C

The MSDS-SDS Hazard Statement of Cupric Chloride Anhydrous Dihydrate Copper II Chloride:

Cupric Chloride or Copper Chloride Anhydrous & Dihydrate Anhydrous
SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 27-Jun-21

Product Name & Other Names: Copper chloride or Cupric chloride Coppertrace or Copper (2+) chloride.
CAS Number.: 10125-13-0 Dihydrate 7447-39-4 Anhydrous.
EINECS EC Number: 231-210-2
Molecular Weight: 170.48 Dihydrate & 134.45 Anhydrous.
Chemical Formula: CuCl2-2H20 Dihydrate & CuCl2 Anhydrous.
Relevant uses and uses advised against (if any): Industrial Manufacturing
SUPPLIER: As per Letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral Category 4, H302
Skin irritation Category 2, H315
Serious eye damage/eye irritation Category 1, H318
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335
Hazardous to the aquatic environment, long-term hazard Category 2 , H411

Hazard statements:
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
H411: Toxic to aquatic life with long lasting effects.

Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P391: Collect spillage.
P501: Dispose of contents/ container to an approved waste disposal plant.

Product Name & Other Names: Copper chloride or Cupric chloride Coppertrace or Copper (2+) chloride.
CAS Number.: 10125-13-0 Dihydrate 7447-39-4 Anhydrous.
EINECS EC Number: 231-210-2

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Not available.
Fire: Not considered to be a fire hazard.
Explosion: Slightly explosive in presence of heat & Metals.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Extinguishing Media Not recommended: None specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. On decomposition it may emit hydrogen chloride. Containers may explode on heating.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Very Harmful! Do not ingest.
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, metals & acids.

Airborne Exposure Limits: Permissible 1 mg/m3 TWA (dust and mist, as Cu, except copper fume) (listed under copper compounds, n.o.s.).100 mg/m3 IDLH (dust and mist, as Cu) (listed under copper compounds, n.o.s.).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: Fine brown powder or crystals
Odor: It is odorless.
Odor threshold: Not available.
pH: around 3
Relative density: around 3.38.
Melting point/freezing point: Not available.
Boiling Point: 993C
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is soluble in water.
Viscosity: Not available.
Molecular Weight: 170.48 Dihydrate & 134.45 Anhydrous.
Chemical Formula: CuCl2-2H20 Dihydrate & CuCl2 Anhydrous.

Stability: Hygroscopic. Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits toxic chlorine or hydrogen chloride fumes when heated to decomposition. It may form cupric oxide and hydrogen chloride and chlorine.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, metals & acids. Also incompatible with potassium, sodium, hydrazine, nitromethane, acetylene, sodium hypobromite.
Conditions to Avoid: Incompatibles and moisture.

Acute toxicity
Very Harmful if swallowed. Chronic exposure may cause damage to a variety of body organs. Toxicity data
CAS# 7447-39-4
Oral, mouse: LD50 = 233 mg/kg;
Oral, rat: LD50 = 584 mg/kg;
Oral, rat: LD50 = 140 mg/kg.
Carcinogenic Effects: Not known to be a carcinogen.
Mutagenic Effects: Mutagenic for bacteria and/or yeast. May cause damage to the following organs: kidneys, lungs, liver, skin.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

Environmental Toxicity: It is also toxic to fish. Harmful to aquatic life in extremely low concentrations. Copper Chloride Anhydrous is toxic to fish and marine organisms when applied to streams, rivers, ponds, or lakes.
Products of Biodegradation: Possibly hazardous short-term degradation products are not likely. However, long term degradation products may arise.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state, and local requirements.

Land Transport DOT USA, TDG Canada & ADR/RID Europe:
UN-Number: UN 2802
Shipping Name: Copper Chloride
CLASS 8, Packing group: III, Identification: 8(Corrosive)
Air Transport IATA/ICAO:
UN-Number: UN 2802
Shipping Name: Copper Chloride
CLASS 8, Packing group: III, Identification: 8(Corrosive)
Sea Transport IMDG/IMO:
UN number: 2802
Class: 8, Packing group: III, EMS-No: F-A, S-B
Proper shipping name: COPPER CHLORIDE
Marine pollutant: Marine pollutant.

USA:
SARA 311/312 Hazards: Immediate Health Hazard, Chronic Health Hazard. See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Cuprous Chloride SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 27-Jun-21

Product Name & Other Names: Cuprous Chloride or Copper (I) Chloride.
CAS No.: 7758-89-6
EINECS EC Number: 231-842-9
Molecular Weight: 99.00
Chemical Formula: CuCl
Relevant uses and uses advised against (if any): Industrial Manufacturing
SUPPLIER: As per Letterhead above.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral Category 4 (H302)
Skin irritation Category 2 (H315)
Serious eye damage Category 1 (H318)
Chronic aquatic toxicity (Category 1), (H410)

Hazard statements:
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H410: Very toxic to aquatic life with long lasting effects.

Product Name & Other Names: Cuprous Chloride or Copper (I) Chloride.
CAS No.: 7758-89-6
EINECS EC Number: 231-842-9

Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Not available.
Fire: Copper Chloride is not considered to be a fire hazard.
Explosion: Copper Chloride is Slightly explosive in presence of heat & Metals.
Fire Extinguishing Media: Use means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Extinguishing Media Not recommended: None specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. On decomposition it may emit hydrogen chloride. Containers may explode on heating.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Toxic! Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, metals & acids.

Appearance: Cupric Chloride is fine brown powder or crystals or granules of beige color.
Odor: It is odorless.
Odor threshold: Not available.
pH: about 5 at 50 g/l at 20C.
Relative density: around 4.14
Boiling Point: 1490C (literature).
Melting Point: 422C (literature).
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is slightly soluble in water.
Viscosity: Not available.
Molecular Weight: 99.00
Chemical Formula: CuCl

Stability: Hygroscopic. Cuprous Chloride is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits toxic chlorine or hydrogen chloride fumes when heated to decomposition. It may form cupric oxide and hydrogen chloride and chlorine.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, metals & acids. Also incompatible with potassium, sodium, hydrazine, nitromethane, acetylene, sodium hypobromite.
Conditions to Avoid: Incompatibles and moisture.

Toxicity data
LD50 Oral - Rat - 336 mg/kg(Cuprous chloride)
LC50 Inhalation - Mouse - 1,008 mg/m3(Cuprous chloride)
Carcinogenic Effects: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

Environmental Toxicity: It is also toxic to fish. Harmful to aquatic life in low concentrations. Toxic to fish and marine organisms when applied to streams, rivers, ponds or lakes.
Toxicity to fish: LC50 - Oncorhynchus mykiss (rainbow trout) - 0.05 - 0.36 mg/l - 96.0 h(Cuprous chloride)
BOD5 and COD: Not available.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Cuprous Chloride, Cupric Chloride Anhydrous Dihydrate Copper Chloride Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Cuprous Chloride, Cupric Chloride Anhydrous Dihydrate - Copper Chloride USP Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 10125-13-0, 7447-39-4, 7758-89-6.

Cuprous Chloride, Cupric Chloride Anhydrous Dihydrate Copper Chloride Manufacturers, Suppliers, Exporters, Wholesalers: