Specifications, Uses, SDS of Potassium Acetate Manufacturers

	King of Chemicals Manufacturers
Specifications, Properties, Uses, SDS of Potassium Acetate USP BP Ph Eur Analytical Reagent Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 127-08-2.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Potassium Acetate for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

CAS Number: 127-08-2, Molecular Weight: 98.14, Chemical Formula: C2H3O2K, EINECS EC Number: 204-822-2, HS Code 29152990 or 29153990

Potassium Acetate is the acetate salt form of potassium, an essential macromineral. It is used as a food acidity regulator. It is a hygroscopic solid under room temperature. Potassium acetate can be used as a deicer to remove ice and prevent its formation. It offers the advantage of being less aggressive on soils and much less corrosive, than other deicers. For this reason, it is preferred for airport runways although it is more expensive. Potassium acetate is used in processed foods as a preservative and acidity regulator. In the European Union, it is labeled by the E number E261. It is also approved for usage in the USA, Australia, and New Zealand. Potassium acetate is used as a catalyst in the production of polyurethanes.

Potassium ;Acetate USP Grade Specifications:
C2H3KO2 --- 98.14
Acetic acid, potassium salt;
Potassium acetate CAS 127-08-2

DEFINITION
Potassium Acetate contains NLT 99.0% and NMT 100.5% of C2H3KO2, calculated on the dried basis.

IDENTIFICATION
A. Identification Tests—General, Potassium.
B. Identification Tests—General, Acetate.

ASSAY
Procedure
Sample: 200 mg of Potassium Acetate, previously dried
Analysis: Dissolve the Sample in 25 mL of glacial acetic acid, add 2 drops of crystal violet and titrate with 0.1 N perchloric acid to a green endpoint. Perform a blank determination and make any necessary correction. Each mL of 0.1 N perchloric acid is equivalent to 9.814 mg of potassium acetate (C2H3KO2).
Acceptance criteria: 99.0%–100.5% on the dried basis

Specifications of Potassium Acetate BP Ph Eur Grade
C2H3O2K -- 98.14 -- 127-08-2

DEFINITION
Potassium acetate contains not less than 99.0 per cent and not more than the equivalent of 101.0 per cent of C2H3KO2, calculated with reference to the dried substance.

CHARACTERS
A white, crystalline powder or colourless crystals, deliquescent, very soluble in water, freely soluble in alcohol.

IDENTIFICATION
A. It gives reaction of acetates.
B. It gives reaction of potassium.

TESTS
Solution S: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: Dissolve 1.0 g in carbon dioxide-free water and dilute to 20 ml with the same solvent. The pH of the solution is 7.5 to 9.0.
Reducing substances: Dilute 10 ml of solution S to 100 ml with water. Add 5 ml of dilute sulphuric acid and 0.5 ml of a 0.32 g/l solution of potassium permanganate. Mix and boil gently for 5 min. The solution remains pink.
Chlorides: Dilute 2.5 ml of solution S to 15 ml with water. The solution complies with the limit test for chlorides (200 ppm).
Sulphates: Dilute 7.5 ml of solution S to 15 ml with distilled water. The solution complies with the limit test for sulphates (200 ppm).
Aluminium: If intended for use in the manufacture of peritoneal dialysis solutions, haemofiltration solutions or hem dialysis solutions, it complies with the test for aluminium. Dissolve 2.0 g in 50 ml of water and add 5 ml of acetate buffer solution pH 6.0. The solution complies with the limit test for aluminium (1 ppm). Use as a reference solution a mixture of 1 ml of aluminium standard solution (2 ppm Al), 5 ml of acetate buffer solution pH 6.0 R and 49 ml of water. To prepare the blank use a mixture of 5 ml of acetate buffer solution pH 6.0 R and 50 ml of water.
Iron: Dilute 5 ml of solution S to 10 ml with water. The solution complies with the limit test for iron (20 ppm).
Heavy metals: Dissolve 5.0 g in water and dilute to 20 ml with the same solvent. 12 ml of the solution complies with limit test A for heavy metals (4 ppm). Prepare the standard using lead standard solution (1 ppm Pb).
Sodium: Not more than 0.5 per cent of Na, determined by atomic emission
Loss on drying: Not more than 3.0 per cent, determined on 1.000 g by drying in an oven at 100C to 105C.

Potassium Acetate Analytical Reagent Grade Specifications
CH3COOK
Formula Weight. 98.14
CAS Number 127-08-2

MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.003%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Sodium (Na): 0.03%

Potassium Acetate SDS GHS, Safety Data Sheet
MSDS, Material Safety Data Sheet 23-Jul-21

Product Name & Other Names: Potassium Acetate or Acetic acid, potassium salt.
CAS No.: 127-08-2
EINECS EC Number: 204-822-2
Molecular Weight: 98.15
Chemical Formula: KC2H3O2
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Product Name & Other Names: Potassium Acetate or Acetic acid, potassium salt.
CAS No.: 127-08-2
EINECS EC Number: 204-822-2

Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Do not induce vomiting. Loosen tight clothing. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Skin Contact: Wash exposed area with soap and water. Get medical advice if irritation develops.
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.

Fire: Potassium Acetate is not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use any means suitable for extinguishing surrounding fire.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Neutralize the residue with a dilute solution of acetic acid. Finish cleaning by spreading water on the contaminated surface and allow to drain as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.

Airborne Exposure Limits: None established.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for this substance. However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved):
For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: Potassium Acetate is white, deliquescent, crystalline powder.
Odor: Odorless.
Odor threshold: Not available.
pH: 9.7 0.1M (solution) literature.
Relative density: 1.57 @ 25C literature.
Melting Point: 292C (558F).
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: 200 g/100 g water.
Viscosity: Not available.
Molecular Weight: 98.15
Chemical Formula: KC2H3O2

Stability: Potassium Acetate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: May produce oxides of carbon and the contained metal.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Moisture, heat, flames, ignition sources and incompatibles.

Oral rat LD50: 3250 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Toxicity to fish: LC50 - Danio rerio (zebra fish) - > 992 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia - > 919 mg/l - 48 h
Toxicity to algae: EC50 - Skeletonema costatum - > 1.000 mg/l - 72 h
Environmental Fate: Readily biodegradable.
Bioaccumulative potential: Does not accumulate in organisms.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Potassium Acetate in accordance with federal, state and local requirements.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
Sea Transport IMDG/IMO: Not dangerous goods.
Air Transport IATA/ICAO: Not dangerous goods.

United States Regulatory Information:
California Proposition 65: Not listed.
SARA 311/312 Hazardous chemical: See section 2.

Potassium Acetate Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Potassium Acetate USP BP Ph Eur Analytical Reagent Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 127-08-2.

Potassium Acetate Manufacturers, Suppliers, Exporters, Wholesalers: