Specifications, Uses, SDS of Ammonium Bromide Manufacturers

	King of Chemicals Manufacturers
Specifications, Properties, Uses, SDS of Ammonium Bromide BP Ph Eur Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 12124-97-9.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Ammonium Bromide for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

CAS Number Ammonium bromide 12124-97-9, EINECS EC Number: 235-183-8, HS Code: 28275990 or 28276090, Molecular Weight 97.9, Chemical Formula NH4Br

Ammonium bromide, NH4Br, is the ammonium salt of hydrobromic acid. The chemical crystallizes in colorless prisms, possessing a saline taste; it sublimes on heating and is easily soluble in water. Ammonium bromide is used for photography in films, plates and papers; in fireproofing of wood; in lithography and process engraving; in corrosion inhibitors; fireproofing of wood; and in pharmaceutical preparations.

Ammonium Bromide BP Ph Eur Grade Specifications:
NH4Br --- 97.9 --- CAS 12124-97-9

CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals, hygroscopic.
Solubility: Freely soluble in water, sparingly soluble in ethanol (96 per cent). It becomes yellow when exposed to light or air.

IDENTIFICATION
A. It gives reaction (a) of bromides.
B. 10 mL of solution S (see Tests) gives the reaction of ammonium salts.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water and dilute to 100 mL with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 mL of solution S add 0.05 mL of methyl red solution. Not more than 0.5 mL of 0.01 M hydrochloric acid or 0.01& M sodium hydroxide is required to change the colour of the indicator.
Bromates: To 10 mL of solution S add 1 mL of starch solution, 0.1 mL of a 100 g/L solution of potassium iodide and 0.25 mL of 0.5 M sulfuric acid and allow to stand protected from light for 5 min. No blue or violet colour develops.
Chlorides and sulfates: To pass the test by Liquid chromatography.
Limits:
-chlorides: maximum 0.6 per cent;
-sulfates: maximum 0.01 per cent.
Iodides: To 5 mL of solution S add 0.15 mL of ferric chloride solution and 2 mL of methylene chloride. Shake and allow to separate. The lower layer is colourless.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C.
Sulfated ash: Maximum 0.1 per cent, determined on 1.0 g.
ASSAY
Dissolve 80.0 mg in water, add 5 mL of dilute nitric acid and dilute to 50 mL with water. Titrate with 0.1 M silver nitrate, determining the endpoint potentiometrically.
1 mL of 0.1 M silver nitrate is equivalent to 9.794 ;mg of NH4Br.
Calculate the percentage content of NH4Br after adjusting for Chloride.

Specifications of Ammonium Bromide Analytical Reagent:
NH4Br
Ammonium Bromide
Formula Weight: 97.94
CAS Number: 12124-97-9

MAXIMUM ALLOWABLE
Residue after ignition: 0.01%
Bromate (BrO3): 0.002%
Chloride (Cl): 0.2%
Iodide (I): Passes test
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm

Ammonium Bromide SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 30-Jul-21

Product Name & Other Names: Ammonium bromide.
CAS No: 12124-97-9
EINECS EC No.: 235-183-8
Molecular Weight: 97.9
Chemical Formula: NH4Br
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008:

Precautionary statements:
P264 Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.

Product Name & Other Names: Ammonium bromide.
CAS #: 12124-97-9
EINECS EC No.: 235-183-8

Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Get medical attention.
Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician. immediately. Loosen tight clothing such as a collar, tie, belt, or waistband.

Flammability of the Product: Non-flammable.
Fire Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
Special Hazards Arising: Nitrogen oxides & hydrogen bromide gas
Extinguishing Media: In case of fire use water spray to cool fire expose containers. Use water spray, dry chemical, Carbon dioxide, or appropriate foam. Use agent most appropriate to extinguish fire.
Extinguishing Media Not recommended: None specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach face the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and drain it as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, strong bases, heavy metals, silver salts, potassium. It is sensitive to moisture.

Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies. There is a blanket recommendation of 10 mg/m3 for inspirable dusts or mists when limits have not otherwise been established.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume, or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: White solid.
Odor: Not available.
Odor threshold: Not available.
pH (1% soln/water): pH 5,0 - 6,5 at 50 g/l at 25 °C.
Relative density: around 2.43
Melting Point: 452C, Sublimes.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Easily soluble in cold water. 970 g/l (25 °C)
Viscosity: Not available.
Molecular Weight: 97.9
Chemical Formula: NH4Br

Stability: The product is stable under usual storage conditions.
Incompatibles: Strong oxidizing agents, Strong acids, Strong bases, Heavy metals, silver salts, Potassium. It is sensitive to moisture.
Conditions to avoid: Incompatibilities, moisture, heat, and direct sunlight.
Polymerization: Will not occur.

Acute toxicity: LD50 Oral - rat: 2.700 mg/kg
Carcinogenicity: No components of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC, ACGIH , NTP, OSHA.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Eco toxicity: Do not empty into drains.
Products of Biodegradation: Possibly hazardous short-term degradation products are not likely. However, long term degradation products may arise.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

Check with all applicable local, regional, and national laws and regulations. Local regulations may be more stringent than regional or national regulations. Small amounts of this material may be suitable for sanitary sewer or trash disposal.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
Sea Transport IMDG/IMO: Not dangerous goods.
Air Transport IATA/ICAO: Not dangerous goods.

USA:
SARA 311/312 Hazards: Immediate Health Hazard. See section2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Ammonium Bromide Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Ammonium Bromide BP Ph Eur Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 12124-97-9.

Ammonium Bromide Manufacturers, Suppliers, Exporters, Wholesalers: