Specifications, Uses, SDS of Acetone Manufacturers

	King of Chemicals Manufacturers
Specifications, Properties, Uses, SDS of Acetone USP NF BP Ph Eur Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 67-64-1.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of Acetone for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

CAS Number: 67-64-1, EINECS EC Number: 200-662-2, Molecular Formula: CH3COCH3, Molecular Weight: 58.08, HS Code 29141100

Acetone is a chemical used to make products like nail polish remover and paint remover. Acetone, or propanone, is an organic compound with the formula (CH3)2CO. About a third of the world's acetone is used as a solvent. Acetone is also present as an excipient in some pharmaceutical drugs.

Acetone USP NF Grade Specifications:
C3H6O --- 58.08
2-Propanone;
Acetone CAS 67-64-1
DEFINITION
Acetone contains NLT 99.0% of C3H6O, calculated on the anhydrous basis.
[Caution: Acetone is very flammable. Do not use where it may be ignited.]
IDENTIFICATION
A. Infrared Absorption
B. The retention time of the Sample corresponds to that of USP Acetone RS, as obtained in the Assay.
ASSAY
To pass the test by Chromatography.
Acceptance criteria: NLT 99.0% on the anhydrous basis.

CHARACTERS
Appearance: Volatile, clear, colourless liquid.
Solubility: Miscible with water and with ethanol (96 per cent). The vapour is flammable.

IDENTIFICATION
A. It complies with the test for relative density (see Tests).
B. To 1 ml, add 3 ml of dilute sodium hydroxide solution and 0.3 ml of a 25 g/l solution of sodium nitroprusside. An intense red colour is produced which becomes violet with the addition of 3.5 ml of acetic acid.
C. To 10 ml of a 0.1 per cent V/V solution of the substance to be examined in ethanol (50 per cent V/V), add 1 ml of a 10 g/l solution of nitrobenzaldehyde in ethanol (50 per cent V/V) and 0.5 ml of strong sodium hydroxide solution. Allow to stand for about 2 min and acidify with acetic acid. A greenish-blue colour is produced.

TESTS
Appearance of solution: To 10 ml add 10 ml of water. The solution is clear and colourless.
Acidity or alkalinity: To 5 ml add 5 ml of carbon dioxide-free water, 0.15 ml of phenolphthalein solution and 0.5 ml of 0.01 M sodium hydroxide. The solution is pink. Add 0.7 ml of 0.01 M hydrochloric acid and 0.05 ml of methyl red solution. The solution is red or orange.
Relative density: 0.790 to 0.793.
Reducing substances: To 30 ml add 0.1 ml of 0.02 M potassium permanganate and allow to stand in the dark for 2 h. The mixture is not completely decolourised.
Related substances: Gas chromatography. To pass the test (0.05 per cent V/V).
Matter insoluble in water: Dilute 1.0 ml to 20 ml with water. The solution is clear.
Residue on evaporation: Maximum 50 ppm.
Water: Maximum 3 g/l, determined on 10.0 ml. Use 20 ml of anhydrous pyridine as solvent.

Specifications of Acetone FCC Food Grade Grade
2-Propanone; Dimethyl Ketone
CH3COCH3
C3H6O Formula wt 58.08
CAS: 67-64-1

DESCRIPTION
Acetone occurs as a clear, colorless, volatile liquid. It is miscible with water, with alcohol, with ether, with chloroform, and with most volatile oils.
Caution: Acetone is highly flammable.
Function: Extraction solvent.

REQUIREMENTS
Identification: Mix 0.1 mL of sample with 10 mL of water, add 5 mL of 1 N sodium hydroxide, warm, and add 5 mL of iodine. A yellow precipitate of iodoform forms.
Assay: Not less than 99.5% and not more than 100.5% of C3H6O, by weight.
Acidity: (as acetic acid) Not more than 0.002%.
Aldehydes (as formaldehyde): Not more than 0.002%.
Alkalinity (as ammonia): Not more than 10 mg/kg.
Distillation Range: Within a range of 1C, including 56.1C.
Lead: Not more than 1 mg/kg.
Methanol: Not more than 0.05%.
Nonvolatile Residue: Not more than 10 mg/kg.
Phenols: Passes test.
Refractive Index: Between 1.358 and 1.360.
Solubility in Water: Passes test.
Specific Gravity: Not greater than 0.7880 at 25C/25C (equivalent to 0.7930 at 20C/20C).
Substances Reducing Permanganate: Passes test.
Water: Not more than 0.5%.

Specifications of Acetone Analytical Reagent Grade
2-Propanone
(CH3)2CO --- Formula Wt 58.08
CAS Number 67-64-1

Suitable for use in ultraviolet spectrophotometry or general use. Product labeling shall designate the one or more of those uses for which suitability is represented on the basis of meeting the relevant requirements and tests. The ultraviolet spectrophotometry requirements include all of the requirements for general use.

MAXIMUM ALLOWABLE
Color (APHA): 10
Residue after evaporation: 0.001%
Solubility in water: Passes test
Titrable acid: 0.0003 meq/g
Titrable base: 0.0006 meq/g
Aldehyde (as HCHO): 0.002%
Isopropyl alcohol: 0.05%
Methanol: 0.05%
Substances reducing permanganate: Passes test
Water: 0.5%

Product Name & Other Names: Acetone or Propanone
CAS Number: 67-64-1
EINECS EC Number: 200-662-2
Molecular Formula: CH3COCH3
Molecular Weight: 58.08
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Flammable liquids Category 2, H225
Serious eye damage/eye irritation Category 2B, H319
Specific target organ toxicity - single exposure (Category 3), Central nervous system, H336

Hazard statements (GHS-USA):
H225 Highly flammable liquid and vapor.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary statements (GHS-USA):
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P261: Avoid breathing vapors.
P264: Wash … thoroughly after handling.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+352: IF ON SKIN: Wash with soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
P403+235: Store in a well-ventilated place. Keep cool.
P501: Dispose of contents/container to authorized agents only.

Product Name & Other Names: Acetone or Propanone
CAS Number: 67-64-1
EINECS EC Number: 200-662-2

Eye contact: Rinse immediately with plenty of water for 10 minutes at least. Contact a physician if symptoms persist.
Skin contact: Wash thoroughly with soap and water; flush with plenty of water. Take off spoilt clothes. Contact physician if symptoms persist.
Ingestion: Wash the mouth with water; seek medical advice immediately.
Inhalation: Remove from exposure site to fresh air and keep at rest. Obtain medical advice.

Flash point: -20C
Extinguishing media recommended: CO2, foam, dry chemicals, Water spray.
Non recommended: Do not use direct water jet on burning material.
Extinguishing procedures: Closed containers may build up pressure at elevated temperatures. If possible, containers should be cooled with a water spray. For large fires, apply water from as far as possible. Keep containers and surroundings cool with water spray. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container. Avoid open flames or other sources of ignition.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like bases, oxidizing agents, reducing agents. Keep away from ignition sources and naked flame. - No smoking. Take measures to prevent the build-up of electrostatic charge. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded.

Exposure limit values:
ACGIH TWA (ppm): 250 ppm
ACGIH STEL (ppm): 500 ppm.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Appearance: Clear colorless liquid
Odor: Sweet.
Odor threshold: Not available.
pH: 7
Relative density: 0.79
Melting point/freezing point: -95C.
Initial boiling point and boiling range: 56C.
Flash point: -20C Closed cup.
Auto-ignition temperature: 465C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Soluble in water.
Viscosity: Not available.
Molecular Formula: CH3COCH3
Molecular Weight: 58.08

Reactivity: It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali, or oxidizing agents.
Decomposition: Carbon monoxide and unidentified organic compounds may be formed during combustion.
Conditions to avoid: Heat, sparks, open flames, and other ignition sources. Avoid temperatures exceeding the flash point. Contact with incompatible materials. Avoid Bases, Oxidizing agents, Reducing agents, Direct sunlight. Extremely high or low temperatures. Acetone reacts violently with phosphorous oxychloride.

LD 50 ORAL/RAT (mg/Kg): 5800 mg/kg
LD 50 DERMAL/RABBIT (mg/Kg) >15800 mg/kg.
LC50 inhalation rat (ppm): 30000 ppm/4h
Carcinogenic Effects: Not a reported carcinogen by NTP, ACGIH, OSHA.
IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans (2-Propanol).
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Toxicity to fish LC50: Oncorhynchus mykiss (rainbow trout) - 5,540 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: LC50 - Daphnia magna (Water flea) - 8,800 mg/l - 48 h.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

In accordance with local environmental laws. Avoid disposing into drainage systems and into the environment.

Land Transport DOT USA, TDG Canada & ADR/RID Europe
UN-No: UN1090
Proper Shipping Name: ACETONE
Hazard Class: 3, Packing Group: II
Sea Transport IMDG/IMO & Air Transport IATA/ICAO
UN-No: UN1090
Proper Shipping Name: ACETONE
Hazard Class: 3, Packing Group: II.

USA:
SARA 311/312 Hazards: Fire Hazard, Immediate Acute Health Hazard. See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Acetone Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Acetone USP NF BP Ph Eur Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 67-64-1.

Acetone Manufacturers, Suppliers, Exporters, Wholesalers: