Specifications, Uses, SDS of Aluminum Phosphate Gel Manufacturers

	King of Chemicals Manufacturers
Specifications, Properties, Uses, SDS of Aluminum Phosphate Gel or Aluminium Phosphate Gel USP BP Ph Eur EP Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number yyy.
King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals.

Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of bbbbb for actual users, including retail or small pack supplies for research and development work.

We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.

The Properties, Specifications, Monograph and Uses of Aluminum Phosphate Gel or Aluminium Phosphate Gel:

Aluminum Phosphate Gel USP Grade Specifications:
Phosphoric acid, aluminum salt (1:1).
Aluminum phosphate (1:1) CAS 7784-30-7
UNII: F92V3S521O

Aluminum Phosphate Gel is a water suspension containing not less than 4.0 percent and not more than 5.0 percent (w/w) of aluminum phosphate (AlPO4). It may contain sodium benzoate, benzoic acid, or other suitable agent in an amount not exceeding 0.5 percent, as a preservative.

Identification:
A: A solution of it in hydrochloric acid meets the requirements of the tests for Aluminum.
B: A solution of it in 2 N nitric acid meets the requirements of the tests for Phosphate.

Aluminium Phosphate Gel BP Ph Eur Grade Specifications:
Action and use: Antacid; vaccine adjuvant.

DEFINITION
Hydrated AlPO4 in gel form.
Content: 19.0 per cent to 21.0 per cent of AlPO4.

CHARACTERS
Appearance: Gel.
Solubility: Practically insoluble in water, in ethanol (96 per cent) and in methylene chloride. It dissolves in dilute solutions of mineral acids.

IDENTIFICATION
A. Solution S (see Tests) gives reaction (b) of phosphates.
B. Solution S gives the reaction of aluminium.
C. It complies with the assay.

TESTS
Solution S: Dissolve 2g in dilute hydrochloric acid and dilute to 100 mL with the same acid.
pH: 6.0 to 8.0.
Peroxides: Maximum 150 ppm, expressed as hydrogen peroxide.
Chlorides: Maximum 500 ppm.
Soluble phosphates: Maximum 0.5 per cent, expressed as PO4.
Sulfates: Maximum 0.2 per cent.
Soluble aluminium: Maximum 50 ppm.
Arsenic: Maximum 1 ppm, determined on 1.0 g.
Acid neutralising capacity: Add 2g to 30 mL of 0.1 M hydrochloric acid heated to 37C and maintain at 37C while shaking. Determine the pH after 15 min. The pH of the mixture is 2.0 to 2.5.
Residue on ignition: 19.0 per cent to 23.0 per cent.
Microbial contamination:
TAMC: acceptance criterion 1000 CFU/g.
TYMC: acceptance criterion 100 ;CFU/g.
Absence of bile-tolerant gram-negative bacteria.
Absence of Escherichia coli.

We also manufacture Aluminium Phosphate Gel or Aluminum Phosphate Gel of EP grade.

The MSDS-SDS Hazard Statement of Aluminum Phosphate Gel or Aluminium Phosphate Gel:

Dried Aluminum Phosphate SDS, Safety Data Sheet
Dried Aluminium Phosphate MSDS Sheet, Material Safety Data Sheet

Product Name & Other Names: Dried Aluminium Phosphate or Dried Aluminum Phosphate
CAS No.: 7784-30-7
EINECS EC Number: 232-056-9
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008:

Precautionary statements:
P234: Keep only in original container.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ---; thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.

Product Name & Other Names: Dried Aluminium Phosphate or Dried Aluminum Phosphate
CAS No.: 7784-30-7
EINECS EC Number: 232-056-9

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

Fire: Not considered to be a fire hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Hazardous Combustion Products: Forms aluminum oxide, phosphorous oxides.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray.Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and bases.

Airborne Exposure Limits: USA - California Permissible Exposure Limits for Chemical Contaminants: 5 mg/m3 TWA.
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a half face piece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: It is colorless crystals or gel.
Odor: Odorless.
Odor threshold: Not applicable.
pH: No information found.
Relative density: No information found.
Melting point/freezing point: No information found.
Initial boiling point and boiling range: No information found.
Flash point: No information found.
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility(ies): No information found.
Viscosity: No information found.

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic and corrosive oxides of phosphorous may be formed when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents and bases.
Conditions to Avoid: Heat and incompatibles.

LD50: > 5000 mg/kg (oral mouse).
LD50 Dermal - Rabbit - > 4,640 mg/kg(
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: No information found.
Teratogenic Effects: No information found.
Developmental Toxicity: No information found.
Reproductive Effects: No information found.

Toxicity Data: No information found.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

DOT ADR/RID:
UN Number: 3260
Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Aluminium phosphate)
Transport Hazard Class: 8
Packaging Group: II
IMDG:
UN Number: 3260
Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Aluminium phosphate)
Transport Hazard Class: 8
Packaging Group: II
IATA:
UN Number: 3260
Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Aluminium phosphate)
Transport Hazard Class: 8
Packaging Group: II

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Aluminum Phosphate Gel or Aluminium Phosphate Gel Manufacturers, Suppliers, Exporters, Wholesalers:

Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-23774610, 91-22-23723564

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Our products are for industrial and laboratory use only. The user must test the material before use. We are not dispensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.

Specifications, Properties, Uses, SDS of Aluminum Phosphate Gel or Aluminium Phosphate Gel USP BP Ph Eur EP Grade Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number yyy.

Aluminum Phosphate Gel or Aluminium Phosphate Gel Manufacturers, Suppliers, Exporters, Wholesalers: