 |
King of Chemicals Manufacturers alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid USP Dietary Supplement and API BP Ph Eur EP USP NF IP JP ChP PPRC Reagent FCC Food Grade Manufacturer |
Specifications, Properties, Uses, SDS of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid USP Dietary Supplement API BP Ph Eur EP IP Manufacturer Supplier Exporter Wholesale & Small Packs, CAS Number 1077-28-7 or 1200-22-2. | |
| King of Chemicals has several associated companies having accreditations like cGMP, GLP - FDA Approved Good Manufacturing Practice and Good Laboratory Practice of WHO standard, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45000, HACCP, FSSC 220000, FSSAI, "REACH" Registered, Kosher & Halal Certified. e-CTD and DMF support can be made available if needed. We offer USP NF BP Ph Eur EP IP JP ChP PPRC Analytical Reagent FCC Food Grade Chemicals & Nutraceuticals. | |
         | |
------ 
Muby Chem Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid USP Dietary Supplement BP Ph Eur EP IP for actual users, including retail or small pack supplies for research and development work.
We supply fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, analytical reagent grade, API IP BP USP Ph Eur EP JP ChP PPRC and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals at best prices. We and/or our associated units have all the facilities to supply as per cGMP standard observing good manufacturing practice and good laboratory practice. We can assure low microbial count and also offer a test certificate for the same. We maintain warehouses across USA, India, and UAE. Our group exports to USA, Canada, Mexico, Argentina, Brazil, Chile, Korea, Malaysia, Thailand, Indonesia, Europe, and several other parts of the world. We supply in wholesale container loads to small pack of few grams. Solid products may be specified for it size and shape as desired by the buyer.
alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid CAS Number 1077-28-7 or 1200-22-2
For Properties Specifications Uses of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid Click Properties, Specifications, Uses, Price, Process of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid Manufacturer.
For For SDS MSDS Sheet of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid Click SDS Safety Data Sheet MSDS Sheet of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid Manufacturer.
The Properties, Specifications, Monograph and Uses of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid:
alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid is used in clinical medicine, dietary supplementation, and laboratory research. It works as a powerful antioxidant and a vital metabolic coenzyme in the mitochondria
Alpha Lipoic Acid USP Dietary Supplement Grade Specifications:
C8H14O2S2 --- 206.33
Thioctic acid;
1,2-Dithiolane-3-pentanoic acid;
1,2-Dithiolane-3-valeric acid CAS 1077-28-7
DEFINITION
Alpha Lipoic Acid contains NLT 99.0% and NMT 101.0% of C8H14O2S2 , calculated on the dried basis.
IDENTIFICATION
A. The retention time of the peak for alpha lipoic acid of the Sample solution corresponds to that of the Standard solution, as obtained in the& Assay.
B. Infrared Absorption
Residue on Ignition: Less than 0.1%
Chromatographic Purity, Procedure 1 and II: To pass the test.
Melting Range or Temperature: 60.0C to 62.0C.
Optical Rotation, Specific Rotation:
Sample solution: 50 mg/mL of Alpha Lipoic Acid, in dehydrated alcohol.
Acceptance criteria: –1.0° to +1.0°
Loss on Drying: Dry a sample in vacuum at 40C for 3 h: it loses NMT 0.2% of its weight.
We also supply IP BP Ph Eur EP grade of Alpha Lipoic Acid.
The MSDS-SDS Hazard Statement of alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid:
α-Lipoic Acid or alpha-Lipoic Acid or Thioctic Acid SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product Name & Other Names: α-Lipoic Acid or alpha-Lipoic Acid or Thioctic Acid.
CAS No.: 1077-28-7 or ( also 1200-22-2)
EINECS EC Number: 214-071-2
Molecular Formula: C8H14O2S2
Molecular Weight: 206.32
Relevant uses and uses advised against (if any): Laboratory and Industrial Use.
Supplier: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, oral Category 4, H302
Skin corrosion/irritation Category 2, H315
Skin sensitization, Category 1, H317
Serious eye damage/eye irritation Category 2A, H319
Hazardous to the aquatic environment, long-term hazard Category 2, H411
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements Irritant Harmful |
GHS Label Elements Aquatic Toxicity |
Signal Words: Warning
Hazard Statements:
H302: Harmful if swallowed.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements:
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310: IF SWALLOWED: Immediately call a POSION CENTER or doctor/physician.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P403+233+235: Store in a well-ventilated place. Keep container tightly closed. Keep cool.
3. Composition/Information on Ingredients
Product Name & Other Names: α-Lipoic Acid or alpha-Lipoic Acid or Thioctic Acid.
CAS No.: 1077-28-7 or ( also 1200-22-2)
EINECS EC Number: 214-071-2
Molecular Formula: C8H14O2S2
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Get medical attention.
Ingestion: Rinse mouth. Do not induce vomiting without medical advice. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Use a mild soap if available. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. For minor skin contact, avoid spreading material on unaffected skin.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Products of Combustion: Carbon oxides, sulfur oxides, and toxic fumes.
Fire Extinguishing Media: Water fog. Alcohol foam. Dry chemical. Polymer foam. Dry chemical powder. Carbon dioxide (CO2). Avoid a solid water stream as it may scatter and spread fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Personal precautions: Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering. Keep out of low areas.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not contaminate water.
Methods for containment: Stop leak if you can do so without risk. Move containers to a safe and open area if the leak is irreparable.
Dike the spilled material, where this is possible. Prevent entry into waterways, sewers, basements, or confined areas.
Methods for cleaning up: Clean up in accordance with all applicable regulations. Should not be released into the environment. Dike far ahead of liquid spill for later disposal. Use a non-combustible material like vermiculite, sand, or earth to soak up the product and place into a container for later disposal.
7. Handling and Storage
Precautions for safe handling: Do not handle or store near an open flame, heat, or other sources of ignition. All equipment used when handling the product must be grounded. Use only with adequate ventilation. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents. Storage: 2C to 8C refrigerate. OK to freeze. Short term shipping may be at ambient temperature. Protect from air and light.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: Yellow Crystalline Powder.
Odor: No data found.
Odor threshold: No data found.
pH: No data found.
Relative density: No data found.
Boiling point: 243C to 246C literature.
Melting point/Freezing point: about 1.29
Flash point: 162C- 163C.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility (water): Practically insoluble in water. Slightly soluble in methanol, chloroform and DMSO.
Viscosity: No data found.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits carbon oxides, sulfur oxides, and toxic fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents.
Conditions to Avoid: Avoid light, heat, sparks, open flames and other ignition sources. Contact with incompatible materials.
11. Toxicological Information
Skin: Harmful in contact with skin.
Ingestion: Harmful if swallowed.
Toxicity data:
LD50 Oral - Rat - 1190 mg/kg
Carcinogenicity: Not expected to be hazardous by IARC, OSHA criteria.
Sensitization: May cause sensitization by skin contact.
Mutagenic Effects: No data found.
Reproductive Effects: No data found.
Developmental Effects: No data found.
Teratogenicity: No data found.
12. Ecological Information
Toxicity to fish: static test LC50 - Danio rerio (zebra fish) - 43 - 96 mg/l - 96 h
Toxicity to daphnia & other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - ca. 15,1 mg/l - 48 h.
Ecotoxicity: Components of this product have been identified as having potential environmental concerns.
Aquatic toxicity: May cause long-term adverse effects in the aquatic environment. Toxic to aquatic life. Discharge into the environment must be avoided.
Bioaccumulative potential: No data found.
Mobility in soil: No data found.
Results of PBT and vPvB assessment: No information available.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Dispose of container and unused contents in accordance with federal, state, and local requirements. Follow all the pollution control rules.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN proper shipping name: Environmentally hazardous substance, solid, n.o.s. (alpha-Lipoic Acid)
UN number: 3077; Transport hazard class(es): 9; Packing group: III.
IMDG/IMO & IATA/ICAO:
UN proper shipping name: Environmentally hazardous substance, solid, n.o.s. (alpha-Lipoic Acid)
UN number: 3077; Transport hazard class(es): 9; Packing group: III.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: Not listed for cancer or reproductive harm.
Section 16 - Additional Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
alpha-Lipoic Acid or α-Lipoic Acid or Thioctic Acid Manufacturers, Suppliers, Exporters, Wholesalers:
King of Chemicals manufacturers
Plot No. 2900/46&47 + 2900/163to167, GIDC, Ankleshwar, Dist. Bharuch, India
India, USA, UAE
TEL: (Office) 91-22-65290111
email: info@kingofchemicals.com
Copyright and Usual Disclaimer is Applicable --- October 23, 2026
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Our products are for industrial and laboratory use only. The user must test the material before use. We are not despensing chemists or druggist and do not offer over the counter type (OTC) products for medical use by individuals.
| We and our associates manufacture pure chemicals surpassing Monograph Specifications of Analytical Reagent Standards, British & European Pharmacopoeia BP Ph Eur EP Standard, US Pharmacopoeia USP NF Standard, Indian Pharmacopoeia IP Standard, Japan Pharmacopoeia JP Standard, FCC Food Grade Standard. | |
alpha-Lipoic Acid or Thioctic Acid All-Rac-Aplha-Tocopherol or DL alpha-Tocopherol or Vitamin E |
|